Secondary Mirror Collimation. Collimate the primary by centering the laser dot in the collimator target; to get your telescope well collimated, here is what you need to accomplish: position and align the secondary mirror. the purpose of secondary mirror alignment is to ensure the secondary is directly below the focuser and is aligned to and reflecting light. there are just four simple steps to collimating your reflector telescope: This is almost always very time consuming but once done should not need readjustment unless the scope is severely shaken or dropped or the vanes and the secondary are removed for any reason. First, checking and aligning the secondary mirror. a quick and dirty way to try and fix collimation, by adjusting the secondary mirror. Step #1 is to roughly align the primary mirror. Check you have good approximate alignment of mirrors; Collimate the secondary by moving the laser dot to the center of the primary; the hardest stage of collimation is the secondary mirror alignment. Step #2 is to position the secondary mirror. Make final checks and tweaks
This is almost always very time consuming but once done should not need readjustment unless the scope is severely shaken or dropped or the vanes and the secondary are removed for any reason. Check you have good approximate alignment of mirrors; First, checking and aligning the secondary mirror. the purpose of secondary mirror alignment is to ensure the secondary is directly below the focuser and is aligned to and reflecting light. Collimate the secondary by moving the laser dot to the center of the primary; there are just four simple steps to collimating your reflector telescope: Collimate the primary by centering the laser dot in the collimator target; Step #2 is to position the secondary mirror. a quick and dirty way to try and fix collimation, by adjusting the secondary mirror. Make final checks and tweaks
Collimation secondary mirror alignment StarGeezer
Secondary Mirror Collimation the purpose of secondary mirror alignment is to ensure the secondary is directly below the focuser and is aligned to and reflecting light. the hardest stage of collimation is the secondary mirror alignment. a quick and dirty way to try and fix collimation, by adjusting the secondary mirror. Collimate the secondary by moving the laser dot to the center of the primary; Collimate the primary by centering the laser dot in the collimator target; Check you have good approximate alignment of mirrors; position and align the secondary mirror. there are just four simple steps to collimating your reflector telescope: First, checking and aligning the secondary mirror. Make final checks and tweaks Step #2 is to position the secondary mirror. Step #1 is to roughly align the primary mirror. This is almost always very time consuming but once done should not need readjustment unless the scope is severely shaken or dropped or the vanes and the secondary are removed for any reason. to get your telescope well collimated, here is what you need to accomplish: the purpose of secondary mirror alignment is to ensure the secondary is directly below the focuser and is aligned to and reflecting light.